BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS141

  • Size9x16"
  • PCD5x120
  • OffsetET36
  • Centre bore69.5 mm
  • Lip1.5"
  • Barrel7"

The BBS RS141 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 9x16 inches and is listed for Opel Monza.

The 5x120 bolt pattern of the BBS RS141 is the one used by BMW and some Land Rover and Honda; the 69.5 mm centre bore decides whether you need hub-centric rings.

At ET36 the BBS RS141 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 16 inches, the BBS RS141 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS141: lip 1.5", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS141, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS141 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1415x1201693669.51.5"7"Opel Monza—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models