BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS142

  • Size9x16"
  • PCD5x112
  • OffsetET8
  • Centre bore66.5 mm
  • Lip2"
  • Barrel6.5"

This page covers the BBS RS142, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 9x16 inches and is listed for MB 107.

The 5x112 bolt pattern of the BBS RS142 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

The BBS RS142 has a low ET8 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 16 inches, the BBS RS142 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS142: lip 2", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS142 came from and how it is built is on the BBS RS page.

Specifications

BBS RS142 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1425x112169866.52"6.5"MB 107—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models