BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS146

  • Size9x16"
  • PCD5x130
  • OffsetET49
  • Centre bore71.6 mm
  • Lip1"
  • Barrel7.5"

The BBS RS146 belongs to the classic three-piece RS family. Size is 9J x 16 and is listed for Porsche 924 S HA, 964 HA.

The 5x130 bolt pattern of the BBS RS146 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

At ET49 the BBS RS146 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 16 inches, the BBS RS146 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS146: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS146, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS146 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1465x1301694971.61"7.5"Porsche 924 S HA, 964 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models