
BBS RS series
BBS RS147
- Size10.5x15"
- PCD5x120
- OffsetET-47
- Centre bore72.5 mm
- Lip5.5"
- Barrel4.5"
This page covers the BBS RS147, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 10.5x15 inches and is listed for BMW M1 VA.
On the BBS RS147, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
With ET-47 on the BBS RS147, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 10.5-inch rim normally takes tyres from about 265 to 315 mm wide.
Before fitting a 15-inch BBS RS147, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS147 multi-piece build: lip 5.5", barrel 4.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS147, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS147 | 5x120 | 15 | 10.5 | -47 | 72.5 | 5.5" | 4.5" | BMW M1 VA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit