BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS148

  • Size13x15"
  • PCD5x120
  • OffsetET-72
  • Centre bore72.5 mm
  • Lip7.5"
  • Barrel5.5"

The BBS RS148 belongs to the classic three-piece RS family. Size is 13J x 15 and is listed for BMW M1 HA, M635CSi HA.

On the BBS RS148, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET-72 on the BBS RS148, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 335-375 mm are the usual match for a 13-inch rim.

Before fitting a 15-inch BBS RS148, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS148 multi-piece build: lip 7.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS148, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS148 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1485x1201513-7272.57.5"5.5"BMW M1 HA, M635CSi HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models