BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS149

  • Size10.5x15"
  • PCD5x120
  • OffsetET-22
  • Centre bore72.5 mm
  • Lip4.5"
  • Barrel5.5"

The BBS RS149 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 10.5x15 inches and is listed for BMW M635CSi VA.

On the BBS RS149, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET-22 on the BBS RS149, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 265-315 mm are the usual match for a 10.5-inch rim.

At 15 inches, the BBS RS149 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS149 is a multi-piece wheel, so the lip and barrel are separate parts: lip 4.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS149, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS149 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1495x1201510.5-2272.54.5"5.5"BMW M635CSi VA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models