BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS150

  • Size7x15"
  • PCD5x112
  • OffsetET42
  • Centre bore57 mm
  • Lip5/8"
  • Barrel6 3/8"

The BBS RS150 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 7 inches wide and is listed for Audi 200.

On the BBS RS150, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.

At ET42 the BBS RS150 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 15-inch BBS RS150, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS150 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5/8", barrel 6 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS150 came from and how it is built is on the BBS RS page.

Specifications

BBS RS150 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1505x11215742575/8"6 3/8"Audi 200—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models