BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS151

  • Size8x16"
  • PCD5x112
  • OffsetET35
  • Centre bore57 mm
  • Lip3/4"
  • Barrel6 3/4"

BBS RS151 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 8J x 16 and is listed for Audi 100.

The 5x112 bolt pattern of the BBS RS151 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.

At ET35 the BBS RS151 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 16 inches, the BBS RS151 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS151 multi-piece build: lip 3/4", barrel 6 3/4". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS151 came from and how it is built is on the BBS RS page.

Specifications

BBS RS151 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1515x11216835573/4"6 3/4"Audi 100—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models