BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS152

  • Size7x15"
  • PCD4x108
  • OffsetET25
  • Centre bore65 mm
  • Lip1 1/8"
  • Barrel5 3/8"

BBS RS152 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7J x 15 and is listed for Saab 9000 bis Bj.8/86.

The 4x108 bolt pattern of the BBS RS152 is the one used by Ford, Peugeot and Citroën; the 65 mm centre bore decides whether you need hub-centric rings.

The BBS RS152 uses ET25, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 15-inch BBS RS152, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS152 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS152 and its siblings, their construction and buying tips.

Specifications

BBS RS152 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1524x10815725651 1/8"5 3/8"Saab 9000 bis Bj.8/86—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models