
BBS RS series
BBS RS153
- Size9.5x15"
- PCD5x120
- OffsetET-15
- Centre bore72.5 mm
- Lip3.5"
- Barrel5.5"
The BBS RS153 belongs to the classic three-piece RS family. Size is 9.5J x 15 and is listed for BMW 635CSi.
On the BBS RS153, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
The BBS RS153 has a low ET-15 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.
At 15 inches, the BBS RS153 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS153: lip 3.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS153 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS153 | 5x120 | 15 | 9.5 | -15 | 72.5 | 3.5" | 5.5" | BMW 635CSi | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit