BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS161

  • Size12.5x15"
  • PCD5x130
  • OffsetET5
  • Centre bore71.6 mm
  • Lip4.5"
  • Barrel7.5"

The BBS RS161 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 12.5x15 inches and is listed for Porsche 928 S HA.

The 5x130 bolt pattern of the BBS RS161 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

The BBS RS161 has a low ET5 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 12.5-inch rim normally takes tyres from about 315 to 365 mm wide.

At 15 inches, the BBS RS161 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS161: lip 4.5", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS161 and its siblings, their construction and buying tips.

Specifications

BBS RS161 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1615x1301512.5571.64.5"7.5"Porsche 928 S HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models