BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS162

  • Size7x15"
  • PCD5x108
  • OffsetET20
  • Centre bore60 mm
  • Lip1 1/8"
  • Barrel5 3/8"

BBS RS162 is a part number from the classic three-piece RS family. It measures 7x15 inches and is listed for Lotus.

The 5x108 bolt pattern of the BBS RS162 is the one used by Ford, Volvo, Jaguar and Peugeot; the 60 mm centre bore decides whether you need hub-centric rings.

The BBS RS162 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 15-inch BBS RS162, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS162 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS162, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS162 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1625x10815720601 1/8"5 3/8"Lotus—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models