BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS163

  • Size8x15"
  • PCD5x108
  • OffsetET30
  • Centre bore60 mm
  • Lip1 1/8"
  • Barrel6.5"

This page covers the BBS RS163, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 8x15 inches and is listed for Lotus.

The 5x108 bolt pattern of the BBS RS163 is the one used by Ford, Volvo, Jaguar and Peugeot; the 60 mm centre bore decides whether you need hub-centric rings.

An offset of ET30 puts the BBS RS163 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

Before fitting a 15-inch BBS RS163, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS163: lip 1 1/8", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS163, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS163 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1635x10815830601 1/8"6.5"Lotus—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models