BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS168

  • Size10.5x15"
  • PCD5x112
  • OffsetET-22
  • Centre bore57 mm
  • Lip4.5"
  • Barrel5.5"

The BBS RS168 belongs to the classic three-piece RS family. It measures 10.5x15 inches and is listed for Audi 200 Quattro.

On the BBS RS168, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.

With ET-22 on the BBS RS168, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 10.5-inch rim normally takes tyres from about 265 to 315 mm wide.

Before fitting a 15-inch BBS RS168, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS168 is a multi-piece wheel, so the lip and barrel are separate parts: lip 4.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS168, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS168 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1685x1121510.5-22574.5"5.5"Audi 200 Quattro—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models