
BBS RS series
BBS RS169
- Size13x15"
- PCD5x112
- OffsetET-54
- Centre bore57 mm
- Lip7"
- Barrel5.5"
This page covers the BBS RS169, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. Size is 13J x 15 and is listed for Audi 200 Quattro.
The 5x112 bolt pattern of the BBS RS169 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.
The BBS RS169 has a low ET-54 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 13-inch rim normally takes tyres from about 335 to 375 mm wide.
Before fitting a 15-inch BBS RS169, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS169 is a multi-piece wheel, so the lip and barrel are separate parts: lip 7", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS169, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS169 | 5x112 | 15 | 13 | -54 | 57 | 7" | 5.5" | Audi 200 Quattro | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit