
BBS RS series
BBS RS170
- Size11x15"
- PCD5x120.65
- OffsetET-31
- Centre bore73.9 mm
- Lip5 1/8"
- Barrel5 3/8"
The BBS RS170 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 11x15 inches and is listed for Jaguar XJ, XJS.
On the BBS RS170, the 5x120.65 PCD is the one used by Chevrolet Corvette and Camaro; the 73.9 mm centre bore decides whether you need hub-centric rings.
With ET-31 on the BBS RS170, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. An 11-inch rim normally takes tyres from about 275 to 325 mm wide.
Before fitting a 15-inch BBS RS170, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS170 is a multi-piece wheel, so the lip and barrel are separate parts: lip 5 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS170, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS170 | 5x120.65 | 15 | 11 | -31 | 73.9 | 5 1/8" | 5 3/8" | Jaguar XJ, XJS | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit