
BBS RS series
BBS RS174
- Size7x16"
- PCD5x114.3
- OffsetET33
- Centre bore73 mm
- Lip1"
- Barrel5.5"
The BBS RS174 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 7x16 inches and is listed for Nissan Cedric.
On the BBS RS174, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.
The BBS RS174 uses ET33, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
Before fitting a 16-inch BBS RS174, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS174: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS174 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS174 | 5x114.3 | 16 | 7 | 33 | 73 | 1" | 5.5" | Nissan Cedric | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit