BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS175

  • Size6.5x15"
  • PCD4x114.3
  • OffsetET36
  • Centre bore64 mm
  • Lip5/8"
  • Barrel5 3/8"

The BBS RS175 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 6.5x15 inches and is listed for Honda Legend.

On the BBS RS175, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi; the 64 mm centre bore decides whether you need hub-centric rings.

ET36 is a high offset for the BBS RS175, so it tucks well inside the arch, as front-drive and most modern cars need. A 6.5-inch rim normally takes tyres from about 165 to 215 mm wide.

Before fitting a 15-inch BBS RS175, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS175: lip 5/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS175 and its siblings, their construction and buying tips.

Specifications

BBS RS175 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1754x114.3156.536645/8"5 3/8"Honda Legend—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models