BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS176

  • Size7x15"
  • PCD5x114.3
  • OffsetET14
  • Centre bore67 mm
  • Lip1 1/8"
  • Barrel5 3/8"

BBS RS176 is a part number from the classic three-piece RS family. It is a 15-inch wheel, 7 inches wide and is listed for Toyota Crown.

On the BBS RS176, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.

With ET14 on the BBS RS176, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 15-inch BBS RS176, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS176 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS176 and its siblings, their construction and buying tips.

Specifications

BBS RS176 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1765x114.315714671 1/8"5 3/8"Toyota Crown—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models