
BBS RS series
BBS RS177
- Size8.5x16"
- PCD5x120.65
- OffsetET46
- Centre bore70.3 mm
- Lip1"
- Barrel7"
This page covers the BBS RS177, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 8.5 inches wide and is listed for Chevrolet Corvette.
On the BBS RS177, the 5x120.65 PCD is the one used by Chevrolet Corvette and Camaro; the 70.3 mm centre bore decides whether you need hub-centric rings.
At ET46 the BBS RS177 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
At 16 inches, the BBS RS177 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS177 multi-piece build: lip 1", barrel 7". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS177 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS177 | 5x120.65 | 16 | 8.5 | 46 | 70.3 | 1" | 7" | Chevrolet Corvette | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit