
BBS RS series
BBS RS178
- Size9.5x17"
- PCD5x120.65
- OffsetET56
- Centre bore70.3 mm
- Lip1"
- Barrel8"
This page covers the BBS RS178, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 9.5x17 inches and is listed for Chevrolet Corvette.
On the BBS RS178, the 5x120.65 PCD is the one used by Chevrolet Corvette and Camaro; the 70.3 mm centre bore decides whether you need hub-centric rings.
At ET56 the BBS RS178 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.
Before fitting a 17-inch BBS RS178, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS178 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 16" center (doublestep).
The BBS RS overview covers the background of the BBS RS178 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS178 | 5x120.65 | 17 | 9.5 | 56 | 70.3 | 1" | 8" | Chevrolet Corvette | 16" center (doublestep) |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit