
BBS RS series
BBS RS179
- Size7x16"
- PCD5x112
- OffsetET35
- Centre bore63.5 mm
- Lip1"
- Barrel5.5"
BBS RS179 is a part number from the classic three-piece RS family. Size is 7J x 16 and is listed for Ford Scorpio.
The 5x112 bolt pattern of the BBS RS179 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 63.5 mm centre bore decides whether you need hub-centric rings.
At ET35 the BBS RS179 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
Before fitting a 16-inch BBS RS179, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS179 multi-piece build: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS179 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS179 | 5x112 | 16 | 7 | 35 | 63.5 | 1" | 5.5" | Ford Scorpio | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit