BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS180

  • Size7.5x16"
  • PCD5x114.3
  • OffsetET14
  • Centre bore67 mm
  • Lip1.5"
  • Barrel5.5"

This page covers the BBS RS180, one wheel from the classic three-piece RS family. It measures 7.5x16 inches and is listed for Toyota Crown 2L+3L.

The 5x114.3 bolt pattern of the BBS RS180 is the one used by many Japanese and Korean cars; the 67 mm centre bore decides whether you need hub-centric rings.

With ET14 on the BBS RS180, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

At 16 inches, the BBS RS180 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS180: lip 1.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS180 and its siblings, their construction and buying tips.

Specifications

BBS RS180 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1805x114.3167.514671.5"5.5"Toyota Crown 2L+3L—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models