BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS182

  • Size8x15"
  • PCD4x108
  • OffsetET12
  • Centre bore63.5 mm
  • Lip2 1/8"
  • Barrel5 3/8"

This page covers the BBS RS182, one wheel from the classic three-piece RS family. It measures 8x15 inches and is listed for Ford Escort.

On the BBS RS182, the 4x108 PCD is the one used by Ford, Peugeot and Citroën; the 63.5 mm centre bore decides whether you need hub-centric rings.

The BBS RS182 has a low ET12 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting a 15-inch BBS RS182, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS182 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS182 came from and how it is built is on the BBS RS page.

Specifications

BBS RS182 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1824x1081581263.52 1/8"5 3/8"Ford Escort—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models