BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS183

  • Size13x15"
  • PCD4x108
  • OffsetET-74
  • Centre bore63.5 mm
  • Lip8"
  • Barrel4.5"

The BBS RS183 belongs to the classic three-piece RS family. It is a 15-inch wheel, 13 inches wide and is listed for Ford Capri HA.

On the BBS RS183, the 4x108 PCD is the one used by Ford, Peugeot and Citroën; the 63.5 mm centre bore decides whether you need hub-centric rings.

With ET-74 on the BBS RS183, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 335-375 mm are the usual match for a 13-inch rim.

Before fitting a 15-inch BBS RS183, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS183: lip 8", barrel 4.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS183 came from and how it is built is on the BBS RS page.

Specifications

BBS RS183 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1834x1081513-7463.58"4.5"Ford Capri HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models