BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS184

  • Size13x15"
  • PCD4x108
  • OffsetET-79
  • Centre bore71.6 mm
  • Lip8"
  • Barrel4.5"

BBS RS184 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 13x15 inches and is listed for Porsche 911 HA.

The 4x108 bolt pattern of the BBS RS184 is the one used by Ford, Peugeot and Citroën; the 71.6 mm centre bore matches Porsche hubs.

With ET-79 on the BBS RS184, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 335-375 mm are the usual match for a 13-inch rim.

Before fitting a 15-inch BBS RS184, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS184: lip 8", barrel 4.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS184 came from and how it is built is on the BBS RS page.

Specifications

BBS RS184 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1844x1081513-7971.68"4.5"Porsche 911 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models