BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS185

  • Size8x15"
  • PCD4x100
  • OffsetET3
  • Centre bore57 mm
  • Lip2.5"
  • Barrel5.5"

The BBS RS185 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 8 inches wide and is listed for BMW 3/1.

On the BBS RS185, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

With ET3 on the BBS RS185, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 15 inches, the BBS RS185 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS185: lip 2.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS185, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS185 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1854x1001583572.5"5.5"BMW 3/1—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models