BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS186

  • Size13x15"
  • PCD4x100
  • OffsetET-48
  • Centre bore57 mm
  • Lip7"
  • Barrel5.5"

BBS RS186 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 13x15 inches and is listed for BMW 3/1 HA.

The 4x100 bolt pattern of the BBS RS186 is the one used by older BMW, VW, Honda and Mazda; the 57 mm centre bore decides whether you need hub-centric rings.

The BBS RS186 has a low ET-48 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 335-375 mm are the usual match for a 13-inch rim.

At 15 inches, the BBS RS186 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS186: lip 7", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS186 and its siblings, their construction and buying tips.

Specifications

BBS RS186 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1864x1001513-48577"5.5"BMW 3/1 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models