BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS187

  • Size9x15"
  • PCD4x108
  • OffsetET-36
  • Centre bore57 mm
  • Lip4.5"
  • Barrel4"

The BBS RS187 belongs to the classic three-piece RS family. It measures 9x15 inches and is listed for Audi 80 Q.

The 4x108 bolt pattern of the BBS RS187 is the one used by Ford, Peugeot and Citroën; the 57 mm centre bore decides whether you need hub-centric rings.

With ET-36 on the BBS RS187, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

At 15 inches, the BBS RS187 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS187 multi-piece build: lip 4.5", barrel 4". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS187 came from and how it is built is on the BBS RS page.

Specifications

BBS RS187 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1874x108159-36574.5"4"Audi 80 Q—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models