
BBS RS series
BBS RS190
- Size9x16"
- PCD5x120.65
- OffsetET-2
- Centre bore73.9 mm
- Lip3"
- Barrel5.5"
BBS RS190 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 9J x 16 and is listed for Jaguar.
The 5x120.65 bolt pattern of the BBS RS190 is the one used by Chevrolet Corvette and Camaro; the 73.9 mm centre bore decides whether you need hub-centric rings.
The BBS RS190 has a low ET-2 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
At 16 inches, the BBS RS190 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
BBS RS190 multi-piece build: lip 3", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS190, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS190 | 5x120.65 | 16 | 9 | -2 | 73.9 | 3" | 5.5" | Jaguar | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit