BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS191

  • Size10x16"
  • PCD5x120.65
  • OffsetET-2
  • Centre bore73.9 mm
  • Lip3.5"
  • Barrel6"

This page covers the BBS RS191, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 10J x 16 and is listed for Jaguar HA.

The 5x120.65 bolt pattern of the BBS RS191 is the one used by Chevrolet Corvette and Camaro; the 73.9 mm centre bore decides whether you need hub-centric rings.

With ET-2 on the BBS RS191, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

Before fitting a 16-inch BBS RS191, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS191 is a multi-piece wheel, so the lip and barrel are separate parts: lip 3.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS191 and its siblings, their construction and buying tips.

Specifications

BBS RS191 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1915x120.651610-273.93.5"6"Jaguar HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models