BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS192

  • Size9x15"
  • PCD4x108
  • OffsetET-36
  • Centre bore63.5 mm
  • Lip4.5"
  • Barrel4"

The BBS RS192 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 9 inches wide and is listed for Ford Capri.

On the BBS RS192, the 4x108 PCD is the one used by Ford, Peugeot and Citroën; the 63.5 mm centre bore decides whether you need hub-centric rings.

With ET-36 on the BBS RS192, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 15 inches, the BBS RS192 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RS192 is a multi-piece wheel, so the lip and barrel are separate parts: lip 4.5", barrel 4". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS192 and its siblings, their construction and buying tips.

Specifications

BBS RS192 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1924x108159-3663.54.5"4"Ford Capri—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models