BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS196

  • Size10x16"
  • PCD5x130
  • OffsetET36
  • Centre bore71.6 mm
  • Lip2"
  • Barrel7.5"

This page covers the BBS RS196, one wheel from the classic three-piece RS family. Size is 10J x 16 and is listed for Porsche 928.

On the BBS RS196, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

ET36 is a high offset for the BBS RS196, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 16-inch BBS RS196, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS196 multi-piece build: lip 2", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS196 came from and how it is built is on the BBS RS page.

Specifications

BBS RS196 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1965x13016103671.62"7.5"Porsche 928—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models