BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS197

  • Size9.5x17"
  • PCD5x120
  • OffsetET13
  • Centre bore72.5 mm
  • Lip2.5"
  • Barrel6.5"

BBS RS197 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It measures 9.5x17 inches and is listed for BMW 5/H, 7/1 HA.

The 5x120 bolt pattern of the BBS RS197 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

With ET13 on the BBS RS197, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.

At 17 inches, the BBS RS197 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS197: lip 2.5", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS197 and its siblings, their construction and buying tips.

Specifications

BBS RS197 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS1975x120179.51372.52.5"6.5"BMW 5/H, 7/1 HA—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models