BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS200

  • Size8.5x17"
  • PCD5x112
  • OffsetET13
  • Centre bore66.5 mm
  • Lip2"
  • Barrel6"

The BBS RS200 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 17-inch wheel, 8.5 inches wide and is listed for MB 126.

On the BBS RS200, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

With ET13 on the BBS RS200, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

Before fitting a 17-inch BBS RS200, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS RS200: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: 16" center (doublestep).

The BBS RS overview covers the background of the BBS RS200 and its siblings, their construction and buying tips.

Specifications

BBS RS200 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2005x112178.51366.52"6"MB 12616" center (doublestep)

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models