
BBS RS series
BBS RS201
- Size10x16"
- PCD5x130
- OffsetET49
- Centre bore71.6 mm
- Lip1.5"
- Barrel8"
This page covers the BBS RS201, one wheel from the classic three-piece RS family. It is a 16-inch wheel, 10 inches wide and is listed for Porsche 944 HA.
The 5x130 bolt pattern of the BBS RS201 is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.
ET49 is a high offset for the BBS RS201, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 16 inches, the BBS RS201 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS201 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS201 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS201 | 5x130 | 16 | 10 | 49 | 71.6 | 1.5" | 8" | Porsche 944 HA | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit