BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS202

  • Size7x15"
  • PCD4x98
  • OffsetET25
  • Centre bore58.1 mm
  • Lip1 1/8"
  • Barrel5.5"

The BBS RS202 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It is a 15-inch wheel, 7 inches wide and is listed for Lancia Delta Integrale.

The 4x98 bolt pattern of the BBS RS202 is the one used by Fiat, Alfa Romeo and Lada; the 58.1 mm centre bore decides whether you need hub-centric rings.

An offset of ET25 puts the BBS RS202 in the usual range for European saloons of its era. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 15-inch BBS RS202, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS202 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1 1/8", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS202 came from and how it is built is on the BBS RS page.

Specifications

BBS RS202 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2024x981572558.11 1/8"5.5"Lancia Delta Integrale—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models