
BBS RS series
BBS RS204
- Size12.5x15"
- PCD5x112
- OffsetET-60
- Centre bore66.5 mm
- Lip7"
- Barrel5.5"
This page covers the BBS RS204, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 12.5J x 15 and is listed for MB 126.
The 5x112 bolt pattern of the BBS RS204 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
The BBS RS204 has a low ET-60 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 315-365 mm are the usual match for a 12.5-inch rim.
At 15 inches, the BBS RS204 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS204 is a multi-piece wheel, so the lip and barrel are separate parts: lip 7", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS204 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS204 | 5x112 | 15 | 12.5 | -60 | 66.5 | 7" | 5.5" | MB 126 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit