
BBS RS series
BBS RS205
- Size9x15"
- PCD5x112
- OffsetET-3
- Centre bore66.5 mm
- Lip3"
- Barrel5.5"
This page covers the BBS RS205, one wheel from the classic three-piece RS family. Size is 9J x 15 and is listed for MB 126.
On the BBS RS205, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
With ET-3 on the BBS RS205, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 15 inches, the BBS RS205 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Lip and barrel recorded for the BBS RS205: lip 3", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
The BBS RS overview covers the background of the BBS RS205 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS205 | 5x112 | 15 | 9 | -3 | 66.5 | 3" | 5.5" | MB 126 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit