BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS206

  • Size11x15"
  • PCD5x112
  • OffsetET-31
  • Centre bore66.5 mm
  • Lip5 1/8"
  • Barrel5 3/8"

BBS RS206 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 15-inch wheel, 11 inches wide and is listed for MB 126.

On the BBS RS206, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

The BBS RS206 has a low ET-31 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 275-325 mm are the usual match for an 11-inch rim.

At 15 inches, the BBS RS206 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS206 multi-piece build: lip 5 1/8", barrel 5 3/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS206, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS206 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2065x1121511-3166.55 1/8"5 3/8"MB 126—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models