BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS207

  • Size6.5x15"
  • PCD4x114.3
  • OffsetET34
  • Centre bore64.1 mm
  • Lip0.5"
  • Barrel5.5"

This page covers the BBS RS207, one wheel from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 15-inch wheel, 6.5 inches wide and is listed for Honda Legend.

On the BBS RS207, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi; the 64.1 mm centre bore decides whether you need hub-centric rings.

The BBS RS207 uses ET34, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 165-215 mm are the usual match for a 6.5-inch rim.

At 15 inches, the BBS RS207 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RS207: lip 0.5", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS207 came from and how it is built is on the BBS RS page.

Specifications

BBS RS207 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2074x114.3156.53464.10.5"5.5"Honda Legend—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models