BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS208

  • Size10x16"
  • PCD5x130
  • OffsetET-30
  • Centre bore71.6 mm
  • Lip4.5"
  • Barrel5"

BBS RS208 is a part number from the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 10 inches wide and is listed for Porsche 928.

On the BBS RS208, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz; the 71.6 mm centre bore matches Porsche hubs.

The BBS RS208 has a low ET-30 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

At 16 inches, the BBS RS208 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RS208 multi-piece build: lip 4.5", barrel 5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS208 came from and how it is built is on the BBS RS page.

Specifications

BBS RS208 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2085x1301610-3071.64.5"5"Porsche 928—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models