
BBS RS series
BBS RS210
- Size8x16"
- PCD4x108
- OffsetET24
- Centre bore65 mm
- Lip1.5"
- Barrel6"
This page covers the BBS RS210, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 16 and is listed for Saab 9000.
The 4x108 bolt pattern of the BBS RS210 is the one used by Ford, Peugeot and Citroën; the 65 mm centre bore decides whether you need hub-centric rings.
An offset of ET24 puts the BBS RS210 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting a 16-inch BBS RS210, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
BBS RS210 multi-piece build: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS210 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS210 | 4x108 | 16 | 8 | 24 | 65 | 1.5" | 6" | Saab 9000 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit