
BBS RS series
BBS RS211
- Size8x16"
- PCD5x120
- OffsetET11
- Centre bore72.5 mm
- Lip2"
- Barrel5.5"
This page covers the BBS RS211, one wheel from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 8J x 16 and is listed for BMW 5/H, 7/1.
The 5x120 bolt pattern of the BBS RS211 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
With ET11 on the BBS RS211, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 16-inch BBS RS211, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS211 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS211, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS211 | 5x120 | 16 | 8 | 11 | 72.5 | 2" | 5.5" | BMW 5/H, 7/1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit