
BBS RS series
BBS RS212
- Size8.5x17"
- PCD5x120
- OffsetET13
- Centre bore72.5 mm
- Lip2"
- Barrel6"
This page covers the BBS RS212, one wheel from the classic three-piece RS family. Size is 8.5J x 17 and is listed for BMW 5/H, 7/1.
On the BBS RS212, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
The BBS RS212 has a low ET13 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
Before fitting a 17-inch BBS RS212, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS212: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
For the history behind the BBS RS212, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS212 | 5x120 | 17 | 8.5 | 13 | 72.5 | 2" | 6" | BMW 5/H, 7/1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit