BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS213

  • Size7x15"
  • PCD5x114.3
  • OffsetET41
  • Centre bore60 mm
  • Lip5/8"
  • Barrel5 7/8"

BBS RS213 is a part number from the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7J x 15 and is listed for Toyota Soarer 2L+3L 88.

On the BBS RS213, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

At ET41 the BBS RS213 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.

Before fitting a 15-inch BBS RS213, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RS213 multi-piece build: lip 5/8", barrel 5 7/8". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

For the history behind the BBS RS213, how to spot a genuine wheel and what to check when buying used, see the BBS RS series guide.

Specifications

BBS RS213 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2135x114.315741605/8"5 7/8"Toyota Soarer 2L+3L 88—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models