BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS215

  • Size7x16"
  • PCD5x114.3
  • OffsetET38
  • Centre bore59.6 mm
  • Lip1"
  • Barrel5.5"

The BBS RS215 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is a 16-inch wheel, 7 inches wide and is listed for Ford Probe.

On the BBS RS215, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 59.6 mm centre bore decides whether you need hub-centric rings.

ET38 is a high offset for the BBS RS215, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 16-inch BBS RS215, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS215 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

More on where the BBS RS215 came from and how it is built is on the BBS RS page.

Specifications

BBS RS215 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2155x114.31673859.61"5.5"Ford Probe—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models