
BBS RS series
BBS RS216
- Size7x16"
- PCD4x108
- OffsetET22
- Centre bore64 mm
- Lip1"
- Barrel5.5"
The BBS RS216 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. It measures 7x16 inches and is listed for Ford Mustang.
On the BBS RS216, the 4x108 PCD is the one used by Ford, Peugeot and Citroën; the 64 mm centre bore decides whether you need hub-centric rings.
The BBS RS216 uses ET22, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 16-inch BBS RS216, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RS216 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS216 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS216 | 4x108 | 16 | 7 | 22 | 64 | 1" | 5.5" | Ford Mustang | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit