
BBS RS series
BBS RS220
- Size7x16"
- PCD4x108
- OffsetET20
- Centre bore63.5 mm
- Lip1"
- Barrel5.5"
The BBS RS220 belongs to the classic three-piece RS family. Size is 7J x 16 and is listed for Ford Sierra Cosworth.
On the BBS RS220, the 4x108 PCD is the one used by Ford, Peugeot and Citroën; the 63.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET20 puts the BBS RS220 in the usual range for European saloons of its era. Tyre widths of roughly 175-225 mm are the usual match for a 7-inch rim.
At 16 inches, the BBS RS220 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RS220 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
More on where the BBS RS220 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS220 | 4x108 | 16 | 7 | 20 | 63.5 | 1" | 5.5" | Ford Sierra Cosworth | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit