BBS RS style illustration
Illustration of the BBS RS design; no photo of this exact part number.

BBS RS series

BBS RS222

  • Size7x15"
  • PCD5x112
  • OffsetET35
  • Centre bore66.5 mm
  • Lip0.5"
  • Barrel6"

The BBS RS222 belongs to the RS range, built from a cast mesh centre bolted between separate inner and outer rim halves. Size is 7J x 15 and is listed for MB 124, 201.

On the BBS RS222, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS RS222, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 15-inch BBS RS222, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The BBS RS222 is a multi-piece wheel, so the lip and barrel are separate parts: lip 0.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The BBS RS overview covers the background of the BBS RS222 and its siblings, their construction and buying tips.

Specifications

BBS RS222 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS2225x1121573566.50.5"6"MB 124, 201—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RS models